108 Engine parts for Land Rover from our Hungary workshop — OEM and checked used components. Ships within the EU with no customs.
O-Ring fitted to the air cleaner / air filter pipe on 2.0L diesel engines. Installed at the air cleaner connection, it seals the joint within the engine air intake to ensure a secure, leak-free interface between intake components.
€12.72
NewLast oneincl. VAT
LUB100350L is a valve stem oil seal fitted to the cylinder head on Freelander 1 models with 1.8 K Series or 2.5 KV6 petrol engines (1996-2006).
€12.72
NewLast oneincl. VAT
€18.72
NewLast oneincl. VAT
LYG500230 is an M6 x 70mm flanged-head bolt supplied with a washer. Fitted within the intercooler and engine intake air duct assemblies, this bolt secures ducting and associated brackets to maintain correct alignment and sealing of the intake system.
€13.80
NewLast oneincl. VAT
FB110081L is an M10 x 40mm flange-head bolt. Fitted to fasten components on various Land Rover models, it is specified for use on air conditioning compressor mountings, water pump and bracket assemblies, and drive belt fittings as noted in the compatibility section below.
€12.30
NewLast oneincl. VAT
LR074073 is a throttle body to intake gasket fitted between the throttle housing (throttle body) and the inlet manifold. Its purpose is to seal the joint and prevent oil or intake-air leakage; inspect the gasket whenever the throttle housing or inlet manifold is removed or if a leak is suspected.
€12.10
NewLast oneincl. VAT
LR004500 Constructed from high-quality materials to withstand the rigors of engine operation, it ensures durability and reliability under various conditions
€5.15
New3 in stockincl. VAT
LZM000020 is an intake duct insert installed inside the air intake duct of the air cleaner and airflow sensor assembly on vehicles equipped with the M47 2.0L I4 16V Diesel engine. It is supplied as the correct replacement part for that specific location within the air cleaner and airflow sensor assembly.
€12.72
New3 in stockincl. VAT
Timing gear cover plug.
€14.84
NewLast oneincl. VAT
LGH10029L is a Cylinder Head Inlet Valve fitted to the cylinder head of the 1.8L K Series petrol engine used in Freelander 1 (L314) models. It controls admission of the air-fuel charge by opening on the intake stroke and then seating against the cylinder head to form a gas-tight seal for compression and combustion. Correct valve face condition and seating affect mixture flow, compression pressure and combustion quality; worn, bent or poorly sealing inlet valves can cause reduced performance, misfire or elevated emissions. When replacing this valve, check the associated valve seats and guides for wear and confirm valve clearances to the manufacturer's specification for the 1.8L K Series application.
€29.90
NewLast oneincl. VAT
LR023050 is a turbo cooling hose gasket for the right-hand turbocharger on 4.4L V8 diesel engines. Fitted to the turbocharger cooling hose, this gasket provides a fluid-tight seal at the hose-to-turbo connection to prevent coolant leaks and ensure correct coolant circulation to the turbocharger assembly. Inspect the gasket whenever the turbocharger or cooling hoses are serviced and replace if it shows signs of deformation, damage or leakage.
€5.90
NewLast oneincl. VAT
PJQ500012 is an Air Cleaner Mounting Rubber. Fitted to Discovery 3, Range Rover Sport and Range Rover Vogue models, this rubber mounting secures the air cleaner to its support within the intake assembly and keeps the air cleaner correctly positioned during vehicle operation.
€4.90
New3 in stockincl. VAT
K3dparts Pro Locator
