108 Engine parts for Land Rover from our Hungary workshop — OEM and checked used components. Ships within the EU with no customs.
LR044088 is a vacuum pump seal fitted to the vacuum pump on 2.2L Puma diesel engines. This seal provides the sealing interface required to maintain the pump's vacuum integrity on applicable engines.
€28.96
NewLast oneincl. VAT
LYR000021L is an exhaust manifold stud fitted to the cylinder head of 1.8 K Series petrol engines. It provides the threaded mounting point for the exhaust manifold fastenings, securing the manifold to the head and helping to maintain correct alignment between the manifold and cylinder head.
€2.05
New3 in stockincl. VAT
LR004532 is an EGR Valve to EGR Cooler Gasket for the 2.7 TDV6 Euro 4 engine. It seals the joint between the EGR valve and the EGR cooler and is fitted to the compatible Discovery and Range Rover Sport models listed below.
€15.90
NewLast oneincl. VAT
1372726 is a turbocharger banjo washer fitted to the turbocharger oil-feed banjo on TDV6, TDV8 and later SDV6 engines. It provides the sealing surface at the oil-feed banjo connection to prevent leaks and ensure correct oil supply to the turbocharger.
€14.87
NewLast oneincl. VAT
1331270 is an EGR cooler gasket fitted to the exhaust gas recirculation cooler on 2.7 TDV6 engines. This gasket provides the seal at the cooler joint to maintain the integrity of the EGR system.
€12.90
NewLast oneincl. VAT
LR095784 is an O-ring used in the timing gear assembly. Fitted within the timing gear, it provides a sealing interface for 2.0L Ingenium and related AJ20 engines to prevent leakage at the mating components.
€5.59
NewLast oneincl. VAT
LR072304 is an Exhaust Manifold Crossover Pipe Gasket. Fitted between the exhaust manifold and crossover pipe on 3.0 V6 diesel engines, this gasket seals the joint to prevent exhaust gas leakage.
€16.96
NewLast oneincl. VAT
LYG500250 is a hex-headed bolt, size M10 x 115mm, used to secure the auxiliary idler pulley. Fitted to 2.7 TDV6 and 3.0D V6 engines, this bolt mounts the auxiliary drive belt idler pulley to its engine bracket.
€16.96
New4 in stockincl. VAT
LR025680 is an M10 flanged nut for the turbocharger. Used to secure the turbocharger mounting on 2.0 TIVCT engines.
€6.96
New4 in stockincl. VAT
ESR3172 is an exhaust mounting rubber. It is fitted to the front and rear exhaust pipes to isolate vibration and retain the exhaust assembly in position, preventing undue movement and noise while the vehicle is running.
€15.10
New3 in stockincl. VAT
LR025680 is an M10 flanged nut for the turbocharger. Used to secure the turbocharger mounting on 2.0 TIVCT engines.
€6.96
New2 in stockincl. VAT
BH110091L is a hex-headed bolt M10 x 45mm. Fitted where a metric M10 x 45mm hex fastener is required, this bolt secures mating components together.
€2.96
New8 in stockincl. VAT
K3dparts Pro Locator
