10 Engine / Intake & throttle parts for Land Rover from our Hungary workshop — OEM and checked used components. Ships within the EU with no customs.
Throttle body to inlet manifold gasket for 4.4D V8 engines. Fitted between the throttle body and the inlet manifold on 4.4L DOHC DITC V8 diesel engines, this gasket seals the joint to prevent intake air leaks that can affect running quality and trigger diagnostic fault codes.
€10.60
NewLast oneincl. VAT
O-Ring fitted to the air cleaner / air filter pipe on 2.0L diesel engines. Installed at the air cleaner connection, it seals the joint within the engine air intake to ensure a secure, leak-free interface between intake components.
€12.72
NewLast oneincl. VAT
LYG500230 is an M6 x 70mm flanged-head bolt supplied with a washer. Fitted within the intercooler and engine intake air duct assemblies, this bolt secures ducting and associated brackets to maintain correct alignment and sealing of the intake system.
€13.80
NewLast oneincl. VAT
LR074073 is a throttle body to intake gasket fitted between the throttle housing (throttle body) and the inlet manifold. Its purpose is to seal the joint and prevent oil or intake-air leakage; inspect the gasket whenever the throttle housing or inlet manifold is removed or if a leak is suspected.
€12.10
NewLast oneincl. VAT
LZM000020 is an intake duct insert installed inside the air intake duct of the air cleaner and airflow sensor assembly on vehicles equipped with the M47 2.0L I4 16V Diesel engine. It is supplied as the correct replacement part for that specific location within the air cleaner and airflow sensor assembly.
€12.72
New3 in stockincl. VAT
PJQ500012 is an Air Cleaner Mounting Rubber. Fitted to Discovery 3, Range Rover Sport and Range Rover Vogue models, this rubber mounting secures the air cleaner to its support within the intake assembly and keeps the air cleaner correctly positioned during vehicle operation.
€4.90
New3 in stockincl. VAT
LR044088 is a vacuum pump seal fitted to the vacuum pump on 2.2L Puma diesel engines. This seal provides the sealing interface required to maintain the pump's vacuum integrity on applicable engines.
€28.96
NewLast oneincl. VAT
1316152 is a rear throttle body seal. It is fitted to the rear of the throttle housing on 2.7 TDV6, 3.0 TDV6 and 3.0 SDV6 diesel V6 engines.
€12.60
New2 in stockincl. VAT
The part number T2H37589 a Valve-vacuum. Specifically designed for the vacuum system in Jaguar.
€159.10
NewLast oneincl. VAT
Bolt for the Inlet manifold, thermostat housing, oil pump, Crankcase.
€0.80
New9 in stockincl. VAT
K3dparts Pro Locator
