28 Engine / Exhaust & catalytic parts for Land Rover from our Hungary workshop — OEM and checked used components. Ships within the EU with no customs.
Exhaust Manifold Spacer - TDV6, 3.0D, 3.6 V8 | Discovery, Range Rover
€8.48
NewLast oneincl. VAT
M6 blind nutsert used to fasten exhaust heatshields and mudflaps on compatible Land Rover models. Fitted into thin panels where a permanent threaded hole is not available, this blind nutsert provides a captive M6 thread for secure attachment of heatshield and mudflap fixings.
€9.54
NewLast oneincl. VAT
EXHAUST GAS RECIRCULATION BOLT - M6 X 80MM
€12.00
NewLast oneincl. VAT
Part number RYG000030 is a vital splash and heat shield specifically engineered for Range Rover models
€5.30
NewLast oneincl. VAT
O-ring used to seal the 60mm EGR valve connection on 2.0L diesel engines. Fitted at the EGR valve joint, this O-ring provides the required seal at the 60mm flange and should be inspected whenever the EGR valve is removed or serviced.
€6.48
NewLast oneincl. VAT
LR032289 is an exhaust pipe gasket. Fitted to the front exhaust system on 4.4L V8 diesel models, it seals the joint between adjacent exhaust pipe sections to prevent exhaust gas leaks. The gasket should be inspected whenever the front exhaust system is accessed and replaced if damaged to maintain a correct seal.
€12.72
NewLast oneincl. VAT
LYR000021L is an exhaust manifold stud fitted to the cylinder head of 1.8 K Series petrol engines. It provides the threaded mounting point for the exhaust manifold fastenings, securing the manifold to the head and helping to maintain correct alignment between the manifold and cylinder head.
€2.05
New3 in stockincl. VAT
LR004532 is an EGR Valve to EGR Cooler Gasket for the 2.7 TDV6 Euro 4 engine. It seals the joint between the EGR valve and the EGR cooler and is fitted to the compatible Discovery and Range Rover Sport models listed below.
€15.90
NewLast oneincl. VAT
1331270 is an EGR cooler gasket fitted to the exhaust gas recirculation cooler on 2.7 TDV6 engines. This gasket provides the seal at the cooler joint to maintain the integrity of the EGR system.
€12.90
NewLast oneincl. VAT
LR072304 is an Exhaust Manifold Crossover Pipe Gasket. Fitted between the exhaust manifold and crossover pipe on 3.0 V6 diesel engines, this gasket seals the joint to prevent exhaust gas leakage.
€16.96
NewLast oneincl. VAT
LR025680 is an M10 flanged nut for the turbocharger. Used to secure the turbocharger mounting on 2.0 TIVCT engines.
€6.96
New4 in stockincl. VAT
ESR3172 is an exhaust mounting rubber. It is fitted to the front and rear exhaust pipes to isolate vibration and retain the exhaust assembly in position, preventing undue movement and noise while the vehicle is running.
€15.10
New3 in stockincl. VAT
K3dparts Pro Locator
