18 Engine / Turbo / supercharger parts for Land Rover from our Hungary workshop — OEM and checked used components. Ships within the EU with no customs.
NEW JAGUAR, Land Rover genuine Turbocharger.. Nr: LR042752. BH10 6K682 CB. YFL00199. 788479-0006 DPQRC. Original JLR Ersatzteile! NEW! Without original paper box. The turbocharger has been tested, report in the photo. LR042752 is a turbocharger for the 2.2 Puma diesel engine. Fitted between the exhaust manifold and the intake tract, it delivers pressurised intake air from the exhaust-driven turbine to the engine's intake manifold, increasing the engine's charge density and combustion efficiency. The unit requires a continuous supply of clean engine oil for lubrication of the shaft and bearings; contamination in the oil can reduce bearing life and accelerate wear, so oil feed and return lines must be cleared of debris and old oil deposits when replacing the turbo.
€1,233.00
NewLast oneincl. VAT
Copper Sealing Washer - Turbo Oil 2.0 I4, 3.0 I6 | Discovery, Range Rover
€6.36
NewLast oneincl. VAT
Oil return hose gasket fitted to the RH side (secondary) turbocharger on compatible 3.0 V6 diesel turbocharged engines. It sits between the turbocharger oil return outlet and the return hose flange and forms the sealing face for the oil return system to prevent oil escaping from the turbocharger return connection.
€9.54
NewLast oneincl. VAT
€9.54
NewLast oneincl. VAT
€6.36
NewLast oneincl. VAT
PHB000450 is an in-line air filter fitted to the turbo vacuum solenoid on TD4 and TD6 diesel engines. It filters the solenoid vent to help prevent contamination entering the turbo vacuum solenoid. The part is used on the compatible Freelander 1 and Range Rover L322 applications listed below.
€10.66
NewLast oneincl. VAT
LR023050 is a turbo cooling hose gasket for the right-hand turbocharger on 4.4L V8 diesel engines. Fitted to the turbocharger cooling hose, this gasket provides a fluid-tight seal at the hose-to-turbo connection to prevent coolant leaks and ensure correct coolant circulation to the turbocharger assembly. Inspect the gasket whenever the turbocharger or cooling hoses are serviced and replace if it shows signs of deformation, damage or leakage.
€5.90
NewLast oneincl. VAT
1372726 is a turbocharger banjo washer fitted to the turbocharger oil-feed banjo on TDV6, TDV8 and later SDV6 engines. It provides the sealing surface at the oil-feed banjo connection to prevent leaks and ensure correct oil supply to the turbocharger.
€14.87
NewLast oneincl. VAT
LR025680 is an M10 flanged nut for the turbocharger. Used to secure the turbocharger mounting on 2.0 TIVCT engines.
€6.96
New2 in stockincl. VAT
LR073723 is a turbocharger gasket fitted between the exhaust manifold and the turbocharger. On 2.0 L Ingenium diesel engines it seals the manifold-to-turbo joint to prevent exhaust gas leakage and help maintain correct turbocharger operation.
€26.90
NewLast oneincl. VAT
LR073687 is a turbocharger O-ring, 14.3 x 2.4 mm. Fitted to the turbocharger lubrication and cooling passages on 2.0 L Ingenium diesel turbochargers, it seals oil connections to prevent leaks and ensure correct lubrication of the turbocharger.
€24.99
NewLast oneincl. VAT
The part number LYG101430L a bolt. Specifically designed for the turbo system in Land Rover.
€4.84
New2 in stockincl. VAT
K3dparts Pro Locator
