Browse Jaguar parts currently in stock. Fitment notes and OEM numbers are added as we curate each listing.

The 16.25 x 2.5 mm O-ring used on air conditioning connections. It seals A/C hose and pipe fittings to help prevent refrigerant and oil leaks on compatible Land Rover models.
€9.54
NewLast oneincl. VAT

EXHAUST GAS RECIRCULATION BOLT - M6 X 80MM
€12.00
NewLast oneincl. VAT

Bolt Timing Belt Tensioner
€9.54
NewLast oneincl. VAT

The 3/8 UNF x 1-1/4 bolt fitted to front flange assemblies on applicable Land Rover models. It secures the flange components and maintains correct alignment of the assembly; the bolt and mating threads should be inspected for damage or contamination during installation and servicing.
€7.42
NewLast oneincl. VAT

The brake pipe clip used to secure front and rear brake pipes in the vehicle's hydraulic braking system. It locates the pipes at their mounting points to help prevent movement and chafing that can lead to wear or damage.
€8.48
NewLast oneincl. VAT

handbrake cable end retaining clip used to secure the outer end of the Parking brake cable within the parking brake assembly. Fitted into the parking brake mechanism, this clip keeps the cable correctly located so the handbrake can apply and hold under load; a damaged or missing clip can allow cable movement and reduce parking brake effectiveness.
€7.42
NewLast oneincl. VAT

idler pulley bolt used on Td5 engines. This bolt secures the idler pulley in the auxiliary drive belt system, holding the pulley in place for correct belt routing and operation. It is fitted to the Defender and Discovery 2 models listed below.
€6.36
NewLast oneincl. VAT

€8.48
NewLast oneincl. VAT

A-pillar interior trim retainer clip. Fitted to the vehicle's A-pillar, the clip secures the interior A-pillar trim panel to the body structure, holding the trim in position and allowing panels to be removed and refitted during servicing.
€8.48
NewLast oneincl. VAT

Shouldered bolt for the timing belt cover. Fitted to the timing belt cover on Freelander (1996-2006) models with the 1.8L K Series petrol engine, this bolt secures the cover in position.
€9.54
NewLast oneincl. VAT

Oil return hose gasket fitted to the RH side (secondary) turbocharger on compatible 3.0 V6 diesel turbocharged engines. It sits between the turbocharger oil return outlet and the return hose flange and forms the sealing face for the oil return system to prevent oil escaping from the turbocharger return connection.
€9.54
NewLast oneincl. VAT

€9.54
NewLast oneincl. VAT