Jaguar parts

Jaguar, Land Rover, genuine nut 2pcs No: FRC8700

FRC8700 is a wheel hub locknut (early type) used on beam axle hubs. On early hubs two of these locknuts are fitted either side of a tab-type lock washer to clamp the hub nut and retain the hub assembly. Please note: on later hub designs (from approx 1998) the locking tab is integrated into the nut and RFD100000 is used instead.

incl. VAT

Genuine Jaguar, Land Rover, bolt 1 Pcs Nr: LR024507

LR024507 is a flanged hex-headed bolt M12 x 80mm. It secures knuckle and hub components on the front and rear assemblies, fastening the knuckle and hub hardware.

incl. VAT

Genuine Jaguar, Land Rover, bolt 1 Pcs Nr: LR038977

LR038977 is a M10 x 100mm flanged-head bolt supplied with a large washer. Fitted to the front axle case, this bolt secures components within the axle assembly.

incl. VAT

Jaguar, Land Rover, genuine Injector-re-fit kit No: C2D60464

incl. VAT

Jaguar, Land Rover, genuine Gasket-thermostat housing 4 pcs No: ERR3490

ERR3490 is a thermostat gasket for 300Tdi engines. Fitted between the thermostat housing and the engine block, it forms the sealing surface that prevents coolant leaks at the thermostat housing joint; replace whenever the housing is removed or a coolant leak is apparent.

incl. VAT

Jaguar, Land Rover, genuine drain plug seal 3pcs No: IYF500010

IYF500010 is a copper crush washer for the auto transfer box oil drain and filler plugs. Fitted to the transfer box on Range Rover L322 models with the M57 D30 3.0 Td6 diesel or M62 B44 4.4 V8 petrol when used with the 5-speed automatic Steptronic transmission, this washer provides a metal-to-metal seal between the drain/filler plug and the transfer drive case to help prevent fluid leaks.

incl. VAT

Jaguar, Land Rover, genuine Drain Plug No: LR166141

Plug - Radiator Drain

incl. VAT

Genuine Jaguar, Land Rover, clip 26 Pcs No: LR028939

LR028939 is a lantern-type retainer clip, size 8.2 x 0.65. Fitted to body mouldings, this retainer secures trim components to the vehicle body to prevent movement and maintain correct panel alignment.

incl. VAT

Jaguar, Land Rover, genuine plug 3pcs No: LR005311

LR005311 is a body sealing plug used to seal openings in body and floor panels. It locates into service or drainage holes to maintain the integrity of body cavities; the plug should be inspected when panels are accessed and replaced if damaged or deformed to ensure a secure seal.

incl. VAT

Genuine Jaguar, Land Rover, rivet 10 Pcs No: RT612283

incl. VAT

Genuine Jaguar, Land Rover, bolt 1 Pcs No: KYG000043

KYG000043 is a flanged head bolt, size M14 x 103mm, used to secure the front lower suspension arm on Range Rover L322 models. Fitted at the lower suspension arm mounting, the flanged head gives a larger bearing surface at the joint to retain the arm to the vehicle structure.

incl. VAT

Jaguar, Land Rover, genuine Bleed nipple kit No: SEE500070

SEE500070 is a Front Brake Caliper Bleed Nipple Kit. Fitted to the front caliper hydraulic circuit, it provides a service port to allow controlled release of brake fluid and trapped air during bleeding operations.

incl. VAT