63 Suspension & Steering parts for Jaguar from our Hungary workshop — OEM and checked used components. Ships within the EU with no customs.
FRC2884 is a 0.005 inch swivel pin shim. It fits between the swivel pin and the swivel housing to precisely set the swivel pin clearance and remove unwanted play, helping to prevent premature wear of the swivel assembly.
€9.54
NewLast oneincl. VAT
€7.42
NewLast oneincl. VAT
€7.42
NewLast oneincl. VAT
FRC2883 is a 0.003 inch swivel pin housing shim. Fitted to the front axle swivel pin housing on applicable models, this shim is the correct thickness specified for use in the swivel pin housing assembly.
€10.60
NewLast oneincl. VAT
The 3/8 UNF x 1-1/4 bolt fitted to front flange assemblies on applicable Land Rover models. It secures the flange components and maintains correct alignment of the assembly; the bolt and mating threads should be inspected for damage or contamination during installation and servicing.
€7.42
NewLast oneincl. VAT
Anti roll bar mounting washer for both front and rear applications. It is used to secure the anti roll bar to its mounting points on Series vehicles, Land Rover Defender (2007-2016), Discovery 1 and Range Rover Classic. This part supersedes part number 264024 and should be checked for wear or corrosion during suspension servicing.
€6.36
NewLast oneincl. VAT
An O ring for power assisted steering pipes. Fitted at the pipe joints on Defender power steering systems, this O ring seals the pipe connections to help prevent fluid loss and maintain system integrity during operation.
€10.60
NewLast oneincl. VAT
A 0.030 inch swivel pin housing shim. Fitted into the swivel pin housing of front axle swivel pin assemblies, this shim establishes a 0.030 inch clearance between the swivel pin and its housing to ensure correct running clearance and to reduce premature wear.
€9.54
NewLast oneincl. VAT
The M14 flanged nylon-insert lock nut used to secure the track rod end (tie rod end) ball joint on Freelander 2 steering assemblies.
€9.54
NewLast oneincl. VAT
Pan-head Torx screw, M10 x 20mm. Fitted to the front suspension on Range Rover L322 models, this screw secures the front ball joint arm to the suspension arm/X-member and provides the clamping required to retain the joint in service.
€8.48
NewLast oneincl. VAT
M14 flanged hex nut with an integral washer. Fitted to the rear suspension arms, this nut secures components within the rear cross member, knuckle and hub assembly.
€10.60
NewLast oneincl. VAT
Part number LR000475 serves as a critical component in the front suspension system, providing structural support and stability to the vehicle's chassis
€6.36
NewLast oneincl. VAT
K3dparts Pro Locator
