20 Suspension & Steering / Control arms & bushings parts for Jaguar from our Hungary workshop — OEM and checked used components. Ships within the EU with no customs.
M14 flanged hex nut with an integral washer. Fitted to the rear suspension arms, this nut secures components within the rear cross member, knuckle and hub assembly.
€10.60
NewLast oneincl. VAT
M12 x 100mm flanged-head bolt used to fasten the front radius arm to the axle. It fits through radius arm bush ANR3332 and is secured with matching nut ANR1000.
€7.48
NewLast oneincl. VAT
M14 x 120mm used to secure front and rear suspension components. Fitted to suspension arms and strut assemblies, this bolt provides the clamping force required to retain suspension geometry; have installation completed and tightened to the manufacturer's torque specification and checked during suspension servicing.
€9.48
NewLast oneincl. VAT
LR096556 is a bolt used to fasten components within the rear cross member and stabilizer bar assemblies, the rear knuckle and suspension arms, and the front knuckle and hub assemblies. It is specified for use across the vehicle locations listed in the compatibility section and should be replaced if damaged or corroded to maintain correct suspension and hub integrity.
€9.72
NewLast oneincl. VAT
255467 is a flanged-head bolt for the swivel pin housing. Fitted to the swivel pin housing, this bolt provides the securing fastener that holds the swivel pin housing in place.
€12.72
NewLast oneincl. VAT
Nut for Rear Knuckle And Hub, Rear Suspension Arms.
€12.72
NewLast oneincl. VAT
KYG000043 is a flanged head bolt, size M14 x 103mm, used to secure the front lower suspension arm on Range Rover L322 models. Fitted at the lower suspension arm mounting, the flanged head gives a larger bearing surface at the joint to retain the arm to the vehicle structure.
€9.00
NewLast oneincl. VAT
Washer for the front suspension.
€15.72
NewLast oneincl. VAT
LR090528This component is engineered to withstand the rigors of driving while maintaining precise alignment and performance. Made from high-strength steel, it offers durability and resistance to wear, ensuring longevity under demanding conditions.
€9.90
NewLast oneincl. VAT
LR090514 is a nut used to secure components within the front suspension arms. Fitted to the front suspension arms, this nut holds arm fixings and associated joints in position; it should be inspected for tightness and corrosion during routine suspension servicing to maintain correct geometry and safe operation.
€4.10
NewLast oneincl. VAT
RYF000182 is a Special Adjustment Washer for the rear upper wishbone. Fitted within the rear upper wishbone adjustment assembly, this washer is used to set and retain the correct adjustment of the rear upper wishbone on applicable Discovery and Range Rover Sport models. It locates within the adjustment assembly to hold the adjustment setting once the suspension is secured and should be checked whenever the rear suspension is serviced.
€7.90
New3 in stockincl. VAT
LR037708 is an adjusting washer fitted to the rear suspension arm assemblies on Range Rover, Range Rover Sport and Discovery 5 models. It is supplied as the genuine Land Rover part for use where this specific washer is required within the rear suspension arm assembly.
€7.20
New2 in stockincl. VAT
K3dparts Pro Locator
