Land Rover is well represented in our warehouse. Check compatibility on each product page before ordering.
Rear anti roll bar drop link
€45.78
NewLast oneincl. VAT
ERR2532 is a rear crankshaft oil seal fitted to the rear of the crankshaft on 5-bearing 4-cylinder petrol and diesel engines up to and including the 200Tdi. The seal's purpose is to retain engine oil at the crankshaft rear sealing surface and prevent external leakage when fitted to the correct engine variants.
€39.64
NewLast oneincl. VAT
LR019118 is a leak-off pipe O-ring. Fitted to the fuel injector leak-off pipe, it seals the injector return path on applicable 2.2 Puma, 2.7 TDV6 and 3.6 TDV8 diesel engines.
€3.20
New11 in stockincl. VAT
FRC3327 is a rod-to-fork retaining clip that secures the clutch slave cylinder push rod to the clutch fork. Fitted to LT77 and R380 manual gearboxes, this clip ensures the slave cylinder push rod remains engaged with the clutch fork so the clutch can be actuated reliably.
€17.20
New7 in stockincl. VAT
FY116056 is an M16 flanged nylon-insert lock nut. Fitted to the rear suspension, this flanged nylon-insert lock nut secures knuckles and suspension arms. Commonly referred to as a flanged nyloc nut or nylon-insert lock nut, it is supplied for use where a retained locking feature is required on M16 fastenings in the rear suspension assembly.
€1.59
New4 in stockincl. VAT
Heat shield - muffler for the rear bumper.
€46.20
NewLast oneincl. VAT
AAU9903 is the upper sealing O-ring used on diesel fuel filter/sedimentor assemblies. Fitted at the filter head, it provides the upper seal and prevents fuel leaking from the top of the filter housing.
€3.55
New9 in stockincl. VAT
Water Inlet Tube Upper Bolt
€49.78
NewLast oneincl. VAT
Jaguar Brake pad wear sensor
€29.90
New3 in stockincl. VAT
QYG500140 is an M12 X 95 shanked hex-headed bolt used to secure the steering box to its mounting. It is specified for Land Rover Defender models built 2007 to 2016 and is used on the Steering Box Power Adwest Lightweight variant (with power steering, fixed ratio) from VIN 7A000001 onwards.
€4.77
New6 in stockincl. VAT
1372721 is an M8 x 38mm hex-headed bolt. Fitted to turbocharger brackets, it secures components to the bracket to maintain correct assembly and alignment.
€11.99
New6 in stockincl. VAT
LR083989 is an air compressor connector which links the valve block to the delivery pipe within the vehicle's air compressor system. Fitted between the valve block and delivery pipe, it provides a sealed connection to maintain the delivery of compressed air to downstream components.
€27.70
New2 in stockincl. VAT
K3dparts Pro Locator
