29 Brakes parts for Land Rover from our Hungary workshop — OEM and checked used components. Ships within the EU with no customs.
The brake pipe clip used to secure front and rear brake pipes in the vehicle's hydraulic braking system. It locates the pipes at their mounting points to help prevent movement and chafing that can lead to wear or damage.
€8.48
NewLast oneincl. VAT
handbrake cable end retaining clip used to secure the outer end of the Parking brake cable within the parking brake assembly. Fitted into the parking brake mechanism, this clip keeps the cable correctly located so the handbrake can apply and hold under load; a damaged or missing clip can allow cable movement and reduce parking brake effectiveness.
€7.42
NewLast oneincl. VAT
M8 countersunk screw, 8 x 20 mm, used to secure the LT230 transfer box transmission brake drum to the drive flange. The countersunk head allows the screw to sit flush with the brake drum face to ensure correct assembly and clamp. Inspect threads and heads for damage or corrosion before refitting.
€9.54
NewLast oneincl. VAT
SYP000100 is an M12 flanged-head bolt used to secure the front brake caliper to its mounting. Fitted to Range Rover L322 models up to 2009, this bolt fastens both fixed and sliding front brake calipers and helps maintain correct caliper alignment with the brake disc during braking.
€5.50
New2 in stockincl. VAT
SMN000010 is a rear brake shoe retainer pin kit. Fitted to the rear drum brake assembly, the retainer pins hold the rear brake shoes and their return springs against the backing plate to keep the shoes correctly located during operation.
€12.72
NewLast oneincl. VAT
SEE500070 is a Front Brake Caliper Bleed Nipple Kit. Fitted to the front caliper hydraulic circuit, it provides a service port to allow controlled release of brake fluid and trapped air during bleeding operations.
€13.87
NewLast oneincl. VAT
LR027133 The components are manufactured to meet stringent quality standards, ensuring durability and performance under various driving conditions. Installation is straightforward, requiring standard tools and basic mechanical knowledge, and is located at the rear axle of the vehicle
€3.87
NewLast oneincl. VAT
LR002526 is a brake pad spring fitted to the front brake calipers. This spring retains the brake pads in the pad carrier, keeping the pads correctly positioned within the caliper.
€12.40
New10 in stockincl. VAT
STC1914 is a guide pin bolt for brake calipers. Fitted in the caliper assembly, this bolt secures the brake caliper guide pin on compatible Land Rover models.
€2.47
New4 in stockincl. VAT
LR004941 is a split pin fitted in the rear brake caliper pin kit on Freelander 2 models.
€22.99
NewLast oneincl. VAT
SYP100241 is an M10 x 10 mm countersunk Torx screw used to retain front and rear brake discs. Fitted to the disc assembly, this screw holds the brake disc in position on the hub during assembly and service operations.
€2.52
New5 in stockincl. VAT
Brake pad wear sensor for JAGUAR XE, XF.
€13.80
NewLast oneincl. VAT
K3dparts Pro Locator
