Land Rover is well represented in our warehouse. Check compatibility on each product page before ordering.
LR0058800 is an output shaft oil seal for the MT82 manual transaxle. Fitted at the gearbox output shaft, it retains transmission lubricant and excludes contaminants from the transmission internals to help maintain reliable operation.
€56.10
NewLast oneincl. VAT
CVW500010 is a Rear End Door Glazing Strip. Fitted to the rear end door, this glazing strip seals the rear end door window on Defender (2007-2016) models.
€72.95
NewLast oneincl. VAT
FN112056 is an M12 flanged hex nut. Fitted to engine mountings and front suspension strut assemblies, it secures the mounting studs and uses its integral flange to help distribute load and reduce point loading. Also referred to as an M12 flange nut, this item should be inspected for thread damage, distortion or corrosion and replaced if compromised; always fit to the correct stud and tighten to the manufacturer's specified torque.
€1.55
New9 in stockincl. VAT
LR060140 is a Name Plate fitted to the exterior trim of the Range Rover Evoque (2012-2018, L538). It serves as an identification badge and completes the vehicle's external appearance; inspect and replace the plate if it becomes damaged, corroded or detached.
€47.50
NewLast oneincl. VAT
Jaguar Steering Boot Kits
€59.10
NewLast oneincl. VAT
LR010517 is an M10 exhaust stud supplied in two lengths (M10 x 14mm and M10 x 26mm). Fitted to the exhaust assembly on Defender models, this stud is used where a keyed stud is required to fasten exhaust flanges and manifolds and to maintain a secure, gas-tight joint.
€7.10
New7 in stockincl. VAT
Mudflap
€49.95
NewLast oneincl. VAT
LR051046 is an M14 x 145mm bolt used to secure the front subframe to the vehicle structure. Fitted to the front subframe mounting points, this bolt provides the primary attachment between the subframe and the body on compatible Land Rover models.
€7.88
New6 in stockincl. VAT
Jaguar Console top finisher
€37.75
NewLast oneincl. VAT
NY605042 is a 5/16 UNF nylon-insert lock nut. Fitted to the clutch master cylinder and associated hydraulic pipes, this lock nut secures the fittings and helps maintain a reliable, leak-free connection in the clutch hydraulic system.
€0.65
New11 in stockincl. VAT
3292 is an oil filler plug used on bellhousing and swivel pin housings. It fits the bellhousing of LT77 and LT85 transmissions and is also used in swivel pin housings to provide a sealed access point for adding or checking oil.
€5.66
New2 in stockincl. VAT
LR124637 is an M14 diameter, 200mm long hex-headed bolt used to secure the front and rear crossmember and stabiliser bar assemblies. It provides the clamping required to locate these structural suspension components; inspect the bolt and mating threads for corrosion or damage and replace if found to ensure a secure fitment.
€17.90
New4 in stockincl. VAT
K3dparts Pro Locator
