Land Rover is well represented in our warehouse. Check compatibility on each product page before ordering.
M12 flanged hex lock nut used to fasten suspension and engine mounting components on the models listed below.
€4.00
NewLast oneincl. VAT
Part number LR000039 is a critical engine mounting component designed to secure the engine in place, minimizing vibrations and enhancing overall vehicle performance.
€3.30
NewLast oneincl. VAT
Nut used in the rear suspension. Fitted within rear springs and shock absorber assemblies, it secures the spring plates and associated fastenings. The nut should be checked for corrosion, thread damage or looseness during any suspension service and replaced if found damaged to maintain secure fastening.
€9.60
NewLast oneincl. VAT
5.3 x 6mm semi-tubular flat rivet. Fitted to the bodyshell, this rivet secures body components on a range of Land Rover models.
€6.36
NewLast oneincl. VAT
3/8 UNF nylon-insert lock nut specified for use on the propeller shafts. It is fitted to the front and rear propshaft flanges to secure the propshaft connection.
€8.48
NewLast oneincl. VAT
Flywheel bolt for Td5 manual transmission engines. Fitted to the crankshaft, this bolt secures the flywheel to the crankshaft on Td5 manual transmission engines.
€8.48
NewLast oneincl. VAT
M12 x 100mm flanged-head bolt used to fasten the front radius arm to the axle. It fits through radius arm bush ANR3332 and is secured with matching nut ANR1000.
€7.48
NewLast oneincl. VAT
M14 x 120mm used to secure front and rear suspension components. Fitted to suspension arms and strut assemblies, this bolt provides the clamping force required to retain suspension geometry; have installation completed and tightened to the manufacturer's torque specification and checked during suspension servicing.
€9.48
NewLast oneincl. VAT
O-ring used to seal the 60mm EGR valve connection on 2.0L diesel engines. Fitted at the EGR valve joint, this O-ring provides the required seal at the 60mm flange and should be inspected whenever the EGR valve is removed or serviced.
€6.48
NewLast oneincl. VAT
5.3 x 5mm semi-tubular rivet. Fitted to the bodyshell on a number of Land Rover models, this rivet is used where a semi-tubular specification is required to secure body panels and related components.
€7.48
NewLast oneincl. VAT
Part number MWC1055PMA is a front seat belt assembly specifically designed.
€4.78
New10 in stockincl. VAT
AWR3257 is a Glow Ignition Switch Ring. Fitted within the steering column shroud on Range Rover P38 models (1994-2001), this ring locates and supports the glow ignition switch to ensure correct positioning and reliable operation.
€8.48
NewLast oneincl. VAT
K3dparts Pro Locator
