Land Rover is well represented in our warehouse. Check compatibility on each product page before ordering.
LR002615 is an M18 x 1.5 tie rod adjusting nut. Fitted to the inner tie rod, this nut is used to adjust and then secure the track rod end so the steering toe alignment can be set and locked after adjustment.
€10.60
NewLast oneincl. VAT
LR024279 is an M5 x 12mm rivet nut. It forms a permanent M5 threaded insert in sheet metal to accept M5 fasteners, commonly used to secure headlamp levelling assemblies, fixings in the A-pillar and components on the rear door frame.
€12.72
NewLast oneincl. VAT
TZB500140 is an output shaft oil seal for the MT82 manual transmission. The seal sits at the transmission output shaft to retain gearbox lubricant and prevent contamination.
€12.72
NewLast oneincl. VAT
PHB000450 is an in-line air filter fitted to the turbo vacuum solenoid on TD4 and TD6 diesel engines. It filters the solenoid vent to help prevent contamination entering the turbo vacuum solenoid. The part is used on the compatible Freelander 1 and Range Rover L322 applications listed below.
€10.66
NewLast oneincl. VAT
LR044283 is a rivet fitted in bodyshell assemblies to fasten panels and closures. It provides a secure mechanical fixing for body panels and trim, helping to maintain panel alignment and prevent movement; any rivets that are damaged, corroded or missing should be replaced during body repairs to preserve the integrity of the bodyshell.
€10.60
NewLast oneincl. VAT
SYP000100 is an M12 flanged-head bolt used to secure the front brake caliper to its mounting. Fitted to Range Rover L322 models up to 2009, this bolt fastens both fixed and sliding front brake calipers and helps maintain correct caliper alignment with the brake disc during braking.
€5.50
New2 in stockincl. VAT
LR006719 is a 6mm retainer nut used to secure the U spring bumper on Freelander 2 models, ensuring the U spring remains correctly positioned.
€12.72
NewLast oneincl. VAT
SMN000010 is a rear brake shoe retainer pin kit. Fitted to the rear drum brake assembly, the retainer pins hold the rear brake shoes and their return springs against the backing plate to keep the shoes correctly located during operation.
€12.72
NewLast oneincl. VAT
€12.72
NewLast oneincl. VAT
O-Ring fitted to the air cleaner / air filter pipe on 2.0L diesel engines. Installed at the air cleaner connection, it seals the joint within the engine air intake to ensure a secure, leak-free interface between intake components.
€12.72
NewLast oneincl. VAT
LUB100350L is a valve stem oil seal fitted to the cylinder head on Freelander 1 models with 1.8 K Series or 2.5 KV6 petrol engines (1996-2006).
€12.72
NewLast oneincl. VAT
Nut for Rear Knuckle And Hub, Rear Suspension Arms.
€12.72
NewLast oneincl. VAT
K3dparts Pro Locator
