Land Rover is well represented in our warehouse. Check compatibility on each product page before ordering.
TYG100560 is a Torx-headed bolt used to secure the front propshaft to the IRD unit. Fitted within the propshafts and viscous coupling assembly, this bolt holds the front propshaft to the IRD unit in position during operation.
€4.99
New5 in stockincl. VAT
The part number TYG000040 a bolt. Specifically designed for the drive shaft system in Land Rover.
€19.25
NewLast oneincl. VAT
LR050752 is a bonnet release lever. Fitted as the interior release lever, it operates the release mechanism to unlatch the bonnet and allow access to the engine bay.
€14.30
NewLast oneincl. VAT
BTR6682 is an edge clip used to secure wiring and interior trim at panel edges in rear interior and loadspace areas. It is fitted in locations such as around the rear quarter glass adjacent to the tailgate where the harness and trim need to be retained.
€1.53
New13 in stockincl. VAT
Exterior trim fixing part.
€12.10
NewLast oneincl. VAT
Brake pad wear sensor
€26.25
NewLast oneincl. VAT
FTC3697 is an R380 mainshaft circlip. Fitted between the 5th mainshaft gear and the synchronizer assembly, it locates the 5th gear on R380 5-speed manual transmissions and is used when servicing or reassembling the mainshaft, 5th gear or synchronizer components.
€1.55
New3 in stockincl. VAT
Cap - Door Locking Mechanism
€68.90
NewLast oneincl. VAT
SOE000011 is a rear brake pad wear sensor fitted to the rear brake pads of Range Rover L322 models. The sensor monitors pad thickness and signals the brake pad wear warning circuit by completing or interrupting an electrical connection to the vehicle wiring loom and instrument warning system. Replacement is normally carried out when a wear warning is present or during brake pad change procedures to restore the monitoring function on Range Rover L322 rear brakes. Please note: This sensor fits either left or right rear brake pad assemblies.
€29.25
NewLast oneincl. VAT
BNP3996 is a 30mm sealing plug supplied as a pack of four. Fitted in various locations on body and door panels, it is used to seal access holes and openings in vehicle panels.
€2.88
New9 in stockincl. VAT
RYH500420 is an M6 nylon-insert lock nut with washer - hex. Fitted where vibration-resistant fastening is required across multiple Land Rover applications, the nylon insert grips the mating thread to help prevent self-loosening under vibration while the washer spreads the clamping load and helps protect the mating surface.
€1.10
New5 in stockincl. VAT
LR072026 is a brake hose used in the rear brake hydraulic line on Range Rover Evoque models (2012-2018). Fitted between the vehicle's rigid brake pipework and the rear caliper, this flexible hose allows suspension movement while carrying brake fluid under pressure; it should be inspected for signs of wear, damage or leakage and replaced if found defective.
€29.61
NewLast oneincl. VAT
K3dparts Pro Locator
