Land Rover is well represented in our warehouse. Check compatibility on each product page before ordering.
LR044288 is a rivet used in bodyshell assemblies on the models listed below. It is specified where rivet fastenings are required to secure bodyshell components during assembly.
€1.50
New10 in stockincl. VAT
IYX500050 is an O-ring and grease kit intended for the input shaft of transfer boxes. Fitted to the input shaft on automatic gearbox transfer boxes and associated drive shafts, the kit contains a replacement O-ring and lubricant to support service work and correct reassembly, restoring the shaft seal and helping to prevent fluid leaks.
€24.90
NewLast oneincl. VAT
RYH501090 is an M20 hex castle nut used to secure the rear top link assembly on Land Rover Defender models built 2007-2016. Fitted to the rear top link, the castellated head allows a locking method with compatible locking hardware to help maintain retention under suspension loads.
€4.99
New4 in stockincl. VAT
LR004447 is an oil cooler and filter housing seal fitted to the oil cooler and filter housing on 2.4L Duratorq-TDCi Puma diesel engines. It provides a pressure-tight seal at the joint between the oil cooler and the filter housing to prevent oil leakage and should be inspected whenever the cooler or housing is removed.
€13.80
NewLast oneincl. VAT
FB108156 is a metric flange head bolt measuring 08 x 75mm.
€1.99
New10 in stockincl. VAT
TDL500030 is a snap ring (circlip) for CV joints. Fitted to the front drive shafts, it secures the inner and outer constant velocity (CV) joints, retaining the joint on the shaft to prevent axial movement during operation.
€2.99
New2 in stockincl. VAT
LR004239 Constructed from high-strength materials, it is designed to withstand the rigors of dynamic driveline applications.
€0.99
New3 in stockincl. VAT
FB110151L is a flange-head bolt, size M10 x 75mm. Fitted to secure components such as air-conditioning compressors, coolant pumps and alternator mountings, this bolt gives a larger bearing surface to help distribute clamp load and resist loosening during normal operation.
€3.90
New4 in stockincl. VAT
LR019015 is a hex-headed bolt that secures the flywheel assembly on 2.2L DW12 diesel engines fitted to Freelander 2 (2006-2014) and Range Rover Evoque (2012-2018). This bolt is specified for that flywheel location and should be matched to the correct part number and application when replacing
€3.98
New4 in stockincl. VAT
Land Rover part number 1406665 is a high-quality flywheel bolt.
€2.55
New5 in stockincl. VAT
Land Rover part number LR002995is a high-quality thermostat housing stud.
€8.55
New3 in stockincl. VAT
FS110141M is an M10 x 14mm flange-head screw. Fitted to fastening points on driveline assemblies in the listed Land Rover models, the flange head provides a larger bearing surface to spread load when securing components.
€4.62
New3 in stockincl. VAT
K3dparts Pro Locator
