Browse Jaguar parts currently in stock. Fitment notes and OEM numbers are added as we curate each listing.
MWC1898 is a 1.5mm plastic shim for side door hinges. Fitted between the door and the door hinge, this shim provides a precise 1.5mm spacer for the hinge assembly to maintain the intended gap at the mounting interface.
€4.10
New14 in stockincl. VAT
LR024149 is an M14 x 90mm Torx bolt used to secure the middle (mid) bush of the front wishbone. Fitted through the centre suspension bush, this bolt retains the wishbone to the subframe and transfers suspension loads into the chassis; ensure the mating threads and Torx recess are clean and undamaged before refitting and tighten to the manufacturer's torque specification.
€3.92
New2 in stockincl. VAT
The part number AJ811580 a screw. Specifically designed for the engine system in Jaguar.
€1.55
New7 in stockincl. VAT
€32.05
UsedLast oneincl. VAT
LR015580 is a front caliper seal kit for front brake calipers. The kit includes seals, guide bushes, a sachet of grease and a bleed screw cap to support refurbishment of the front calipers during servicing.
€22.55
NewLast oneincl. VAT
KYG500380 is a hex-headed M6 x 13.5mm bolt supplied with a washer. Fitted to secure heat shields and heater hoses, this bolt provides the mechanical fixing required where those components attach.
€0.66
New5 in stockincl. VAT
LR073726 is an idler pulley fitted to the accessory drive of 2.0 L Ingenium petrol and diesel engines. It routes and guides the accessory drive belt around the engine's auxiliary components to ensure correct belt alignment.
€49.55
NewLast oneincl. VAT
STC500090 is a Master Cylinder Repair Kit for brake and clutch applications. Fitted when overhauling clutch and CV-type brake master cylinders, this kit provides the parts required to refurbish the master cylinder and restore correct operation. Please note: This fits the CV type brake/clutch master cylinder only. Replaces part number 276176.
€29.50
NewLast oneincl. VAT
CPT000010 is a fixing block gasket for the side window catch. Fitted to the upper cab of hard-top Defender models, this gasket locates the fixing block within the side window catch assembly and helps maintain correct alignment of the catch components.
€4.55
New6 in stockincl. VAT
1337060 is an oil vapour separator gasket. This gasket seals the oil vapour separator to the engine within the crankcase ventilation system on 2.7 TDV6 and 3.0 SDV6 diesel engines.
€7.50
New2 in stockincl. VAT
Jaguar Air particle filter.
€19.90
NewLast oneincl. VAT
Jaguar Bumper-Front lower cover.
€31.50
NewLast oneincl. VAT
K3dparts Pro Locator
