Browse Jaguar parts currently in stock. Fitment notes and OEM numbers are added as we curate each listing.
PCD100150 is an expansion tank pressure cap fitted to the expansion tank of select Land Rover Defender, Discovery 1 and Range Rover Classic models. It is used on vehicles specified with 4-cylinder petrol, 2.4 VMTD and V8 engines.
€10.33
NewLast oneincl. VAT
LYG500250 is a hex-headed bolt, size M10 x 115mm, used to secure the auxiliary idler pulley. Fitted to 2.7 TDV6 and 3.0D V6 engines, this bolt mounts the auxiliary drive belt idler pulley to its engine bracket.
€16.96
New4 in stockincl. VAT
TOF100030 is a 15.2mm hub spacer with a blue colour code. Used on front and rear wheel bearings to set the bearing spacing within the hub assembly.
€18.10
NewLast oneincl. VAT
LR054871 is an O-Ring 10.82 x 1.78mm for the air conditioning system. Fitted at A/C sealing points, this O-Ring acts as a sealing element to prevent refrigerant leaks.
€3.99
New2 in stockincl. VAT
LR001193 is an M8 x 45mm Torx flange-head bolt used to secure the propeller shaft to the transmission and the rear axle drive. It is fitted at the propshaft flange and at the gearbox/front axle case interfaces shown in the compatibility list below
€2.99
NewLast oneincl. VAT
SX110301 is an M10 x 30mm high-tension screw used on Defender rear suspension assemblies. It secures suspension components such as bottom links and hubs and is specified for high-tension applications where a secure clamp is required.
€2.99
New4 in stockincl. VAT
STC1914 is a guide pin bolt for brake calipers. Fitted in the caliper assembly, this bolt secures the brake caliper guide pin on compatible Land Rover models.
€2.47
New4 in stockincl. VAT
LR025680 is an M10 flanged nut for the turbocharger. Used to secure the turbocharger mounting on 2.0 TIVCT engines.
€6.96
New4 in stockincl. VAT
ESR3172 is an exhaust mounting rubber. It is fitted to the front and rear exhaust pipes to isolate vibration and retain the exhaust assembly in position, preventing undue movement and noise while the vehicle is running.
€15.10
New3 in stockincl. VAT
Nut for Wishbone-Front-AWD
€4.99
New2 in stockincl. VAT
This part is specifically designed for the Insulators of the Land Rover.
€0.88
New8 in stockincl. VAT
LR025680 is an M10 flanged nut for the turbocharger. Used to secure the turbocharger mounting on 2.0 TIVCT engines.
€6.96
New2 in stockincl. VAT
K3dparts Pro Locator
