60 Transmission & Drivetrain parts for Jaguar from our Hungary workshop — OEM and checked used components. Ships within the EU with no customs.
M12 x 65mm hex-headed bolt used to secure the rear propshaft coupling (doughnut) within the rear propshaft assembly. Fitted where the coupling joins the propshaft, it holds the doughnut in position to transfer drive torque; during servicing, check the bolt and mating threads for corrosion or damage and refit to the manufacturer's torque specification.
€6.36
NewLast oneincl. VAT
3/8 UNF nylon-insert lock nut specified for use on the propeller shafts. It is fitted to the front and rear propshaft flanges to secure the propshaft connection.
€8.48
NewLast oneincl. VAT
Flywheel bolt for Td5 manual transmission engines. Fitted to the crankshaft, this bolt secures the flywheel to the crankshaft on Td5 manual transmission engines.
€8.48
NewLast oneincl. VAT
TZB500140 is an output shaft oil seal for the MT82 manual transmission. The seal sits at the transmission output shaft to retain gearbox lubricant and prevent contamination.
€12.72
NewLast oneincl. VAT
FRC2464 is a felt washer for the LT230 output flange, fitted to the output flange seals of LT230 transfer boxes. The washer supports the sealing surface at the output flange and helps retain lubricant at the transfer box output.
€9.72
NewLast oneincl. VAT
LR038977 is a M10 x 100mm flanged-head bolt supplied with a large washer. Fitted to the front axle case, this bolt secures components within the axle assembly.
€9.72
NewLast oneincl. VAT
IYF500010 is a copper crush washer for the auto transfer box oil drain and filler plugs. Fitted to the transfer box on Range Rover L322 models with the M57 D30 3.0 Td6 diesel or M62 B44 4.4 V8 petrol when used with the 5-speed automatic Steptronic transmission, this washer provides a metal-to-metal seal between the drain/filler plug and the transfer drive case to help prevent fluid leaks.
€9.72
NewLast oneincl. VAT
607183 is a pinion gasket for a Salisbury differential. This gasket seals the pinion output flange on Salisbury differentials to prevent oil leakage; it is fitted to the rear axle on long-wheelbase Series 2 and Series 3 vehicles and Defender 110 and 130 models up to 2006.
€12.72
NewLast oneincl. VAT
FTC3276 is an inner swivel ball oil seal. It fits at the rear of the swivel ball and provides a seal between the swivel housing and the ball joint area to retain lubrication and help prevent ingress of dirt and water during normal operation.
€10.90
NewLast oneincl. VAT
Bolt for Swivel Pin Housing
€3.90
NewLast oneincl. VAT
RFD500020 is an M24 x 1.5mm hub nut. Fitted at the axle end of the driveshaft on both front and rear hubs, this nut secures the wheel bearing and hub assembly.
€9.80
NewLast oneincl. VAT
LR045926 is a 3/8 UNF x 1-3/4 propeller shaft bolt. Fitted to the rear propshaft flange, this propeller shaft bolt (also called a propshaft or flange bolt) secures the rear propshaft flange to the mating flange on the drive assembly. Ensure threads and flange faces are clean and undamaged before refitting and replace the bolt if the head or threads are corroded or stripped.
€2.89
New5 in stockincl. VAT
K3dparts Pro Locator
