23 Transmission & Drivetrain / Propshaft / driveshaft parts for Jaguar from our Hungary workshop — OEM and checked used components. Ships within the EU with no customs.
Land Rover Part Number: 255467 - Flanged-Head Bolt - Swivel Pin Housing 255467 is a flanged-head bolt for the swivel pin housing. Fitted to the swivel pin housing, this bolt provides the securing fastener that holds the swivel pin housing in place.
€9.54
NewLast oneincl. VAT
Hex-Headed Bolt M10 x 60mm - Defender, Discovery 1, Range Rover Classic
€6.36
NewLast oneincl. VAT
An output shaft snap ring for the MT82 manual transmission. It secures and retains the output shaft components inside the MT82 gearbox to prevent axial movement.
€5.30
NewLast oneincl. VAT
A 3/8 inch UNF propeller shaft bolt. Fitted to both front and rear propeller shafts, this bolt secures the shaft flanges together to retain the propshaft. Commonly referred to as a propshaft bolt, it uses a 3/8" UNF thread and is fitted to a range of Land Rover models
€10.07
NewLast oneincl. VAT
M12 x 65mm hex-headed bolt used to secure the rear propshaft coupling (doughnut) within the rear propshaft assembly. Fitted where the coupling joins the propshaft, it holds the doughnut in position to transfer drive torque; during servicing, check the bolt and mating threads for corrosion or damage and refit to the manufacturer's torque specification.
€6.36
NewLast oneincl. VAT
3/8 UNF nylon-insert lock nut specified for use on the propeller shafts. It is fitted to the front and rear propshaft flanges to secure the propshaft connection.
€8.48
NewLast oneincl. VAT
TZB500140 is an output shaft oil seal for the MT82 manual transmission. The seal sits at the transmission output shaft to retain gearbox lubricant and prevent contamination.
€12.72
NewLast oneincl. VAT
607183 is a pinion gasket for a Salisbury differential. This gasket seals the pinion output flange on Salisbury differentials to prevent oil leakage; it is fitted to the rear axle on long-wheelbase Series 2 and Series 3 vehicles and Defender 110 and 130 models up to 2006.
€12.72
NewLast oneincl. VAT
FTC3276 is an inner swivel ball oil seal. It fits at the rear of the swivel ball and provides a seal between the swivel housing and the ball joint area to retain lubrication and help prevent ingress of dirt and water during normal operation.
€10.90
NewLast oneincl. VAT
RFD500020 is an M24 x 1.5mm hub nut. Fitted at the axle end of the driveshaft on both front and rear hubs, this nut secures the wheel bearing and hub assembly.
€9.80
NewLast oneincl. VAT
LR045926 is a 3/8 UNF x 1-3/4 propeller shaft bolt. Fitted to the rear propshaft flange, this propeller shaft bolt (also called a propshaft or flange bolt) secures the rear propshaft flange to the mating flange on the drive assembly. Ensure threads and flange faces are clean and undamaged before refitting and replace the bolt if the head or threads are corroded or stripped.
€2.89
New5 in stockincl. VAT
571718 is a front driveshaft inner swivel oil seal. Fitted to the rear of the driveshaft swivel ball, the outer halfshaft passes through the seal; it retains lubricant at the swivel and excludes dirt and moisture to help prevent premature wear of the swivel assembly.
€14.96
New4 in stockincl. VAT
K3dparts Pro Locator
