23 Transmission & Drivetrain / Propshaft / driveshaft parts for Jaguar from our Hungary workshop — OEM and checked used components. Ships within the EU with no customs.
LR001193 is an M8 x 45mm Torx flange-head bolt used to secure the propeller shaft to the transmission and the rear axle drive. It is fitted at the propshaft flange and at the gearbox/front axle case interfaces shown in the compatibility list below
€2.99
NewLast oneincl. VAT
RRY500180 is an oil seal retainer for the swivel housing. Fitted to the front axle swivel housing, it secures the driveshaft oil seal and helps prevent lubricant escaping from the swivel assembly. This part is used on Land Rover Defender models 2007-2016 (from VIN 7A000001) on the front drive shafts.
€4.89
NewLast oneincl. VAT
LR004239 Constructed from high-strength materials, it is designed to withstand the rigors of dynamic driveline applications.
€0.99
New3 in stockincl. VAT
LR024151 is a M24 x 2.0mm stake nut supplied with a washer for the driveshaft. Fitted to the driveshaft, this nut fastens the shaft while the washer helps to distribute load at the connectio
€9.20
New2 in stockincl. VAT
LR059968 is a drive shaft oil seal fitted to the drive shaft swivel housing. It retains lubricant within the swivel assembly and limits the ingress of dirt and water to help maintain lubrication of the swivel components and reduce contamination-related wear.
€36.25
NewLast oneincl. VAT
TYG100560 is a Torx-headed bolt used to secure the front propshaft to the IRD unit. Fitted within the propshafts and viscous coupling assembly, this bolt holds the front propshaft to the IRD unit in position during operation.
€4.99
New5 in stockincl. VAT
The part number TYG000040 a bolt. Specifically designed for the drive shaft system in Land Rover.
€19.25
NewLast oneincl. VAT
TVK500490 is a grease nipple for the front and rear propeller shaft. It provides a lubrication access point and is fitted to the universal joints and to the propeller shaft on Defender models from 2007 to 2016, from VIN 7A000001.
€3.99
New7 in stockincl. VAT
CDU1534L is a drive shaft stake nut fitted to secure components within the drive shaft assembly.
€11.20
New4 in stockincl. VAT
FRC8292 is an O ring for the intermediate shaft on LT230 transfer boxes. Fitted around the intermediate shaft, this O ring seals the shaft to retain lubricant inside the transfer box and to help keep contaminants out of the seal area; it should be replaced if it becomes brittle, torn or begins to leak.
€12.10
New17 in stockincl. VAT
Bolt Hex Head M10 x 40 Power Transfer Unit.
€1.88
New4 in stockincl. VAT
K3dparts Pro Locator
