12 Transmission & Drivetrain / Transfer case parts for Jaguar from our Hungary workshop — OEM and checked used components. Ships within the EU with no customs.
Pan-headed Torx screw with an M6 x 25mm specification. Fitted where small components require a secure fixing, this pan-headed Torx fastener secures various trim and minor components on applicable Land Rover models.
€6.36
NewLast oneincl. VAT
€7.42
NewLast oneincl. VAT
M6 x 16mm flanged head set screw. It is supplied for general-purpose use across multiple Land Rover models where a metric flange-head screw is specified to secure assemblies.
€6.36
NewLast oneincl. VAT
M10 double hex-head bolt used on the swivel housing. It secures the oil seal retainer to the swivel housing and should be inspected for corrosion, thread damage or distortion whenever the swivel housing or drive shafts are serviced.
€1.00
New24 in stockincl. VAT
Front Differential Drive Unit (All Wheel Drive)
€5.30
NewLast oneincl. VAT
FRC2464 is a felt washer for the LT230 output flange, fitted to the output flange seals of LT230 transfer boxes. The washer supports the sealing surface at the output flange and helps retain lubricant at the transfer box output.
€9.72
NewLast oneincl. VAT
IYF500010 is a copper crush washer for the auto transfer box oil drain and filler plugs. Fitted to the transfer box on Range Rover L322 models with the M57 D30 3.0 Td6 diesel or M62 B44 4.4 V8 petrol when used with the 5-speed automatic Steptronic transmission, this washer provides a metal-to-metal seal between the drain/filler plug and the transfer drive case to help prevent fluid leaks.
€9.72
NewLast oneincl. VAT
FTC4939 is an Output Flange Oil Seal fitted to the LT230 transfer box. The seal prevents lubricant leakage at the transfer box output flange, ensuring the flange joint remains correctly sealed during operation.
€17.96
NewLast oneincl. VAT
LR006096 is a special bolt used to secure the rear output flange on the MT82 transmission. Fitted to the MT82 gearbox on Land Rover Defender models from 2007 to 2016, this bolt fastens the rear output flange to the transmission housing and helps maintain the driveshaft connection.
€18.02
NewLast oneincl. VAT
ICV100000 is an input shaft oil seal. It fits the LT230 transfer box and the LT77 and R380 extension cases used with 5-speed manual gearboxes, and seals the input/mainshaft to prevent gearbox or transfer box oil loss. Replaces part number FRC2365.
€9.90
NewLast oneincl. VAT
LR017522 is an oil seal mud shield designed for the front flange of an LT230 transfer box. When fitted to the transfer box front flange, the shield protects the oil seal from road debris and contaminants.
€6.40
NewLast oneincl. VAT
FRC5576 is an O-ring for the LT230 transfer box front output shaft. Fitted to the front output shaft assembly of the LT230 transfer box, this O-ring is used where the shaft passes through the housing to provide a seal and help prevent fluid loss.
€7.99
New5 in stockincl. VAT
K3dparts Pro Locator
