21 Engine / Engine block & internals parts for Jaguar from our Hungary workshop — OEM and checked used components. Ships within the EU with no customs.
€8.48
NewLast oneincl. VAT
LDI100030 is a front camshaft oil seal for TD5 engines. Fitted to the front of the camshaft in the cylinder head, it prevents oil leakage from the cylinder head.
€10.72
NewLast oneincl. VAT
LUB100350L is a valve stem oil seal fitted to the cylinder head on Freelander 1 models with 1.8 K Series or 2.5 KV6 petrol engines (1996-2006).
€12.72
NewLast oneincl. VAT
FB110081L is an M10 x 40mm flange-head bolt. Fitted to fasten components on various Land Rover models, it is specified for use on air conditioning compressor mountings, water pump and bracket assemblies, and drive belt fittings as noted in the compatibility section below.
€12.30
NewLast oneincl. VAT
LGH10029L is a Cylinder Head Inlet Valve fitted to the cylinder head of the 1.8L K Series petrol engine used in Freelander 1 (L314) models. It controls admission of the air-fuel charge by opening on the intake stroke and then seating against the cylinder head to form a gas-tight seal for compression and combustion. Correct valve face condition and seating affect mixture flow, compression pressure and combustion quality; worn, bent or poorly sealing inlet valves can cause reduced performance, misfire or elevated emissions. When replacing this valve, check the associated valve seats and guides for wear and confirm valve clearances to the manufacturer's specification for the 1.8L K Series application.
€29.90
NewLast oneincl. VAT
BH110091L is a hex-headed bolt M10 x 45mm. Fitted where a metric M10 x 45mm hex fastener is required, this bolt secures mating components together.
€2.96
New8 in stockincl. VAT
FS106307L is an M6 x 30 flanged head screw fitted to Td5 engines. It secures the lower end of the timing chain guide and fastens the rocker cover to the cylinder head, ensuring correct seating of the cover and guide assembly.
€3.51
New4 in stockincl. VAT
4147433 is an M6 x 25mm bolt used to fasten components in a range of applications; it is used to secure the oil pump on TDV8 engines.
€1.50
New9 in stockincl. VAT
Cylinder Block Plug.
€3.99
New3 in stockincl. VAT
LR033197 is an M14 flanged nut used to secure engine mounting assemblies on Range Rover, Range Rover Sport and Discovery 5 models. It is specified for use on the engine mounting fittings listed below; inspect the threads and replace the nut if damaged or corroded before refitting.
€2.89
New5 in stockincl. VAT
Jaguar bolt camshaft m12x35mm
€11.70
New3 in stockincl. VAT
Valve Spring Retaining Cap.
€18.90
NewLast oneincl. VAT
K3dparts Pro Locator
