37 Engine / Exhaust & catalytic parts for Jaguar from our Hungary workshop — OEM and checked used components. Ships within the EU with no customs.
KYG500380 is a hex-headed M6 x 13.5mm bolt supplied with a washer. Fitted to secure heat shields and heater hoses, this bolt provides the mechanical fixing required where those components attach.
€0.66
New5 in stockincl. VAT
LR004477 is an EGR cooler gasket. Fitted between the EGR cooler and its connecting pipe, this gasket seals the joint within the exhaust gas recirculation system to prevent exhaust gas leakage and maintain correct EGR operation.
€24.90
NewLast oneincl. VAT
WYP000025 is a screw measuring 9 x 10 x 1.5 cm. Fitted to fasten components, this screw secures assemblies in Land Rover vehicles; check the head and threads for damage or corrosion before reuse.
€3.15
New10 in stockincl. VAT
1336543 is an Exhaust Manifold Gasket. Fitted to the exhaust system of 2.7 TDV6, 3.0 TDV6 and 3.0 SDV6 diesel V6 engines, including 3.0 SDV6 hybrid variants.
€19.65
NewLast oneincl. VAT
LR106277 is a flanged hex nut used to secure mating threaded fasteners in Land Rover assemblies. The integral flange provides a larger bearing surface to help distribute clamping load and resist loosening, reducing the need for a separate washer where a flanged specification is required.
€1.68
New10 in stockincl. VAT
FS108206 is an M8 x 20mm flange-head screw, also referred to as a flange bolt. Fitted where a flange-head fastener is specified, this screw secures components on the Land Rover models listed below.
€1.98
New17 in stockincl. VAT
LR113358 is an exhaust manifold stud. It is supplied in M8 x 16mm and M8 x 8mm configurations and is used to secure the exhaust manifold to the cylinder head on the specified 3.0 V6 and 4.4 V8 diesel engines.
€4.89
New6 in stockincl. VAT
1316028 is an M6 x 16mm flanged-head bolt. Fitted to the exhaust gas recirculation (EGR) valve and exhaust manifold assemblies, it secures those components in position.
€1.23
New23 in stockincl. VAT
LR010517 is an M10 exhaust stud supplied in two lengths (M10 x 14mm and M10 x 26mm). Fitted to the exhaust assembly on Defender models, this stud is used where a keyed stud is required to fasten exhaust flanges and manifolds and to maintain a secure, gas-tight joint.
€7.10
New7 in stockincl. VAT
Bracket for the EGR system
€59.75
NewLast oneincl. VAT
Exhaust Gas Recirculation tube clamp.
€1.10
New3 in stockincl. VAT
Jaguar Damper for the Exhaust Pipe Front.
€99.01
NewLast oneincl. VAT
K3dparts Pro Locator
