61 Transmission & Drivetrain parts for Land Rover from our Hungary workshop — OEM and checked used components. Ships within the EU with no customs.
571718 is a front driveshaft inner swivel oil seal. Fitted to the rear of the driveshaft swivel ball, the outer halfshaft passes through the seal; it retains lubricant at the swivel and excludes dirt and moisture to help prevent premature wear of the swivel assembly.
€14.96
New4 in stockincl. VAT
FTC4939 is an Output Flange Oil Seal fitted to the LT230 transfer box. The seal prevents lubricant leakage at the transfer box output flange, ensuring the flange joint remains correctly sealed during operation.
€17.96
NewLast oneincl. VAT
LR045965 is a hex-headed flywheel bolt used to secure the flywheel to the crankshaft on Defender models fitted with the 2.2 Puma Diesel engine. The bolt fastens into the flywheel mounting holes to maintain correct alignment between the flywheel and crankshaft during engine operation.
€3.50
New3 in stockincl. VAT
Transmission Mounting bolt
€4.10
New3 in stockincl. VAT
LR006096 is a special bolt used to secure the rear output flange on the MT82 transmission. Fitted to the MT82 gearbox on Land Rover Defender models from 2007 to 2016, this bolt fastens the rear output flange to the transmission housing and helps maintain the driveshaft connection.
€18.02
NewLast oneincl. VAT
LR001193 is an M8 x 45mm Torx flange-head bolt used to secure the propeller shaft to the transmission and the rear axle drive. It is fitted at the propshaft flange and at the gearbox/front axle case interfaces shown in the compatibility list below
€2.99
NewLast oneincl. VAT
FRC6145 is a magnetic drain plug for the R380 gearbox. Fitted to the transmission case of R380 gearboxes, it provides the gearbox drain point and the magnetic feature helps capture ferrous particles to reduce wear on internal gears.
€13.49
NewLast oneincl. VAT
608246 is a differential drain plug used to seal the oil level drain and filler taper holes on differential casings, and it is also used as the speedo housing plug in LT230 transfer boxes. The part provides a secure closure to retain differential and transfer box lubricant; when servicing, check the plug and threads for damage or contamination to ensure a reliable seal
€13.90
New2 in stockincl. VAT
Rear drive shaft to differential oil seal with part number TZB500050. This oil seal is suitable for the rear drive shafts of various modern Land Rover vehicles.
€21.00
NewLast oneincl. VAT
RRY500180 is an oil seal retainer for the swivel housing. Fitted to the front axle swivel housing, it secures the driveshaft oil seal and helps prevent lubricant escaping from the swivel assembly. This part is used on Land Rover Defender models 2007-2016 (from VIN 7A000001) on the front drive shafts.
€4.89
NewLast oneincl. VAT
LR000770 is an oil seal fitted to manual transmission external components on 6 Speed Manual (M66) transmissions. It is used on external gearbox components to form a fluid-tight barrier, helping to retain transmission oil and prevent contamination entering the gearbox.
€9.90
NewLast oneincl. VAT
ICV100000 is an input shaft oil seal. It fits the LT230 transfer box and the LT77 and R380 extension cases used with 5-speed manual gearboxes, and seals the input/mainshaft to prevent gearbox or transfer box oil loss. Replaces part number FRC2365.
€9.90
NewLast oneincl. VAT
K3dparts Pro Locator
