10 Suspension & Steering / Shock / strut parts for Land Rover from our Hungary workshop — OEM and checked used components. Ships within the EU with no customs.
Anti roll bar mounting washer for both front and rear applications. It is used to secure the anti roll bar to its mounting points on Series vehicles, Land Rover Defender (2007-2016), Discovery 1 and Range Rover Classic. This part supersedes part number 264024 and should be checked for wear or corrosion during suspension servicing.
€6.36
NewLast oneincl. VAT
A 0.030 inch swivel pin housing shim. Fitted into the swivel pin housing of front axle swivel pin assemblies, this shim establishes a 0.030 inch clearance between the swivel pin and its housing to ensure correct running clearance and to reduce premature wear.
€9.54
NewLast oneincl. VAT
Part number LR000475 serves as a critical component in the front suspension system, providing structural support and stability to the vehicle's chassis
€6.36
NewLast oneincl. VAT
Nut used in the rear suspension. Fitted within rear springs and shock absorber assemblies, it secures the spring plates and associated fastenings. The nut should be checked for corrosion, thread damage or looseness during any suspension service and replaced if found damaged to maintain secure fastening.
€9.60
NewLast oneincl. VAT
LR050513 is an M12 x 40 mm hex-headed bolt used to fasten the front axle case. Fitted at the front axle case mounting, this bolt secures the axle case to the vehicle structure and ensures correct alignment of the front driveline components.
€1.90
New3 in stockincl. VAT
LR161093 ensuring a precise fit for vehicles equipped with electronic air suspension.
€1.90
NewLast oneincl. VAT
LR044836 is a 6mm Voss connector for air suspension lines. It is fitted on the compressor feed and on the top of the air spring on some models, providing a secure push-fit connection between sections of flexible air tubing and the suspension valve assembly.
€22.49
NewLast oneincl. VAT
LR041295 is a valve block to pipe connector used in the air suspension valve assembly. It links the valve block to the air line, securing the pipe to the valve block to allow air to pass within the valve assembly.
€17.10
NewLast oneincl. VAT
The part number T2H17786 a bolt. Specifically designed for the suspension system in Jaguar.
€3.55
New2 in stockincl. VAT
LR018446 is an air suspension pipe that links the axle valve to the front left-hand air spring. Fitted to the air suspension system on Range Rover Vogue models from VIN 9A000001 up to 2009, this pipe carries air between the axle valve and the front left spring to allow normal suspension operation.
€35.50
NewLast oneincl. VAT
K3dparts Pro Locator
