84 Body & Exterior parts for Jaguar from our Hungary workshop — OEM and checked used components. Ships within the EU with no customs.
CYC000010 is a Windscreen Cowl Centre Clip. Fitted centrally on the windscreen cowl panel, it secures the cowl to the vehicle bodywork and ensures correct alignment at the centre mounting point.
€1.99
New20 in stockincl. VAT
DYX000010 is an O-ring fitted to the windscreen washer bottle and filler neck to seal the washer fluid reservoir. This seal maintains a watertight connection to prevent washer fluid leaks and to protect the system from contamination; inspect and replace if the O-ring shows signs of hardening, cracking or deformation.
€5.99
NewLast oneincl. VAT
LR043552 is a rivet that secures panels and trim within the vehicle bodyshell on the models listed below. Fitted as a bodyshell fastener, this rivet holds body panels and trim in position; it should be replaced if it becomes bent, broken or corroded during removal to ensure a secure refit.
€1.10
New12 in stockincl. VAT
LR044288 is a rivet used in bodyshell assemblies on the models listed below. It is specified where rivet fastenings are required to secure bodyshell components during assembly.
€1.50
New10 in stockincl. VAT
FB108156 is a metric flange head bolt measuring 08 x 75mm.
€1.99
New10 in stockincl. VAT
BNP4556L is a window winder handle retainer clip that fits on the front door window winder shaft to secure the handle to the regulator spindle. It holds the winder handle in correct engagement with the regulator so the window can be operated manually without the handle sliding off. A worn or damaged clip will allow the handle to become loose or detach from the spindle and should be replaced to restore secure operation.
€9.99
New3 in stockincl. VAT
LR000085 is a wiper spindle cap. Fitted to the front windscreen wiper spindle, this cap provides the correct factory cover and fitment for the spindle.
€2.52
NewLast oneincl. VAT
The part number LR011865 a screw. Specifically designed for the exterior rear view mirror system in Land Rover.
€1.50
New16 in stockincl. VAT
Floor Panel Plastic Lock Nut For Land Rover Defender 90,110,130.
€0.60
New6 in stockincl. VAT
RYG500910 is an M6 x 35mm hex-headed bolt supplied with a washer. Fitted where a combined M6 x 35mm bolt-and-washer fixing is specified, this fastener secures assemblies by clamping components together while the washer helps distribute load and protect the mating surface.
€1.10
New12 in stockincl. VAT
SE108251 is an M8 x 25mm pan-headed screw used to secure rear body lower mountings, rear end door hinges, stirrup step-side doors and the tailboard lower side hinged striker on Land Rover Defender models (1987-2006). It is a standard pan-head machine screw with an M8 thread and 25 mm length; inspect for corrosion, thread damage or distortion when servicing hinges or body mountings and replace any items that show wear.
€1.99
New4 in stockincl. VAT
LR043556 is a Rivet. Used as a rivet in Land Rover vehicles.
€1.10
New24 in stockincl. VAT
K3dparts Pro Locator
